87006R 2-Inch Red LED Trailer Side Marker Light, 12V
87006R Round Trailer Marker Lamp | 3 LEDs | Grommet Mount | IP67
| Item | Specification |
|---|---|
| Product model | 87006R |
| Product type | LED side marker lamp |
| Light colour | Red |
| Nominal size | 2 inches round |
| Light source | 3 LEDs |
| Operating voltage | 12V DC |
| Stated current draw | 0.05 A at 13.8V |
| Lens material | Polycarbonate (PC) |
| Body construction | Ultrasonically welded sealed body |
| Mounting | Grommet mount |
| Connector | Compatible with a 2-pin plug |
| Ingress protection | IP67 |
| Lens marking in historical notice | LIWOF, SAE P2 18 DOT |
| Standard listed in historical notice | United States FMVSS 571.108 |
The 87006R is a round red LED side marker lamp designed for vehicle and trailer applications. The historical test documentation identifies the tested light source as three LEDs operating on 12V DC.
With a nominal 2-inch round format, the lamp can be considered for installations where a compact side marker light is required.
The supplied drawing shows a 51.7 mm diameter. Check the lamp and grommet dimensions against the available installation space before ordering.
The lamp is designed for grommet mounting and a 2-pin plug connection. A right-angle plug configuration is described as compatible.
For OEM installation, confirm the connector dimensions, wire functions and clearance behind the mounting panel. The grommet, plug and wiring supplied may depend on the ordered configuration.
The lamp features a polycarbonate lens and an ultrasonically welded sealed body. Its stated IP67 rating describes protection against dust and temporary immersion under specified test conditions.
The connector and wiring arrangement should also be considered when the lamp is installed in an area exposed to water or road spray.
The 87006R is supported by a 2019 test report referenced in an AMECA Notice of Equipment Compliance. The notice identifies the product as a red side marker lamp with 3 LEDs and 12V DC operation, and lists United States FMVSS 571.108.
The notice records the lens marking LIWOF, SAE P2 18 DOT. Buyers should verify that the supplied lamp matches the tested configuration and request the relevant current documentation for their application.
The historical notice describes the tested lamp for use on vehicles with an overall width of 2,032 mm or less. Suitability for a particular vehicle depends on the applicable requirements and installation.
Certificates
What is the stated current draw?
The supplied product specification states 0.05 A at 13.8V. This value should be checked against the current 3 LED configuration before publication.
What size is the lamp?
The lamp is described as a nominal 2-inch round light. The supplied dimension drawing indicates Ø51.7 mm.
What panel cut-out is required?
The panel cut-out must be matched to the grommet and its installation dimensions. The 51.7 mm lamp dimension should not automatically be treated as the required cut-out size.
Is the lamp waterproof?
The supplied specification states an IP67 rating for protection against dust and temporary immersion under specified test conditions. Connector protection and installation also affect the complete assembly.
What does the historical test notice cover?
The notice identifies the 87006R red side marker lamp, with 3 LEDs and 12V DC operation, and lists FMVSS 571.108. It records use on vehicles with an overall width of 2,032 mm or less.
Are the grommet and plug included?
The lamp is designed for grommet mounting and a 2-pin plug. Please confirm the contents of the selected package when ordering.
+86 574 82002494
info@eravehicle.com
