87726 900kg 10 Inch Swing-Up Trailer Jockey Wheel with Solid Rubber Tyre (250mm Lift) – Heavy-Duty Caravan Boat Jack Wholesale
Commercial-Grade 900kg (2000 lbs) Capacity Australian-Standard Swing-Up Swivel Jockey Wheel with 10" (254mm) Puncture-Proof Solid Rubber Tyre | Direct Factory OEM & Bulk Supply
| Technical Specification | Parameters & Engineering Details |
| Product Type | Heavy-Duty Swing-Up Trailer Jockey Wheel / Swivel Tongue Jack |
| Rated Load Capacity | 900 kg (Approx. 2000 lbs Static / Dynamic Tongue Support) |
| Wheel Diameter / Size | 10 Inch / 254mm Oversized Wheel |
| Wheel Tyre Material | 100% Puncture-Proof Solid Rubber Tyre with Reinforced Steel Hub |
| Lifting Height / Stroke | 250mm (Approx. 10 Inch) Precision Vertical Travel Range |
| Mounting Bracket Type | Integrated Heavy-Duty Swing-Up Swivel Bracket (Multi-Position Pull-Pin) |
| Chassis Compatibility | Fits 50mm, 75mm, and 100mm Standard Trailer Drawbars (U-Bolt or Bolt-On) |
| Drive Operation | Ergonomic Top-Wind / Side-Crank Handle Mechanism |
| Material Construction | High-Tensile Heavy-Duty Carbon Steel Body |
| Surface Finish | Marine-Grade Hot-Dip Galvanized / Heavy Zinc-Plated Rust Protection |
| Target Applications | Caravans, Heavy Boat Trailers, Off-Road Campers, Commercial Utility Trailers |
| B2B Supply Capabilities | OEM Tube Dimensions, Custom Swivel Plate Drill Patterns, Private Labeling, Pallet Export Packaging |
Key Features
Extra-Large 10″ (254mm) Puncture-Proof Solid Rubber Tyre: High-density 10-inch solid rubber tire glides effortlessly over loose gravel, sand, lawn, and uneven boat ramps while completely eliminating flat tires, air leaks, and sidewall blowouts.
Heavy-Duty 900kg (2000 lbs) Support Rating: Engineered with high-strength structural steel tubing and precision bearings, designed to handle up to 900kg vertical tongue loads on large caravans and tandem-axle marine trailers without flexing.
Effortless Swing-Up Swivel Transit Clearance: Features an integrated swivel bracket with a heavy-duty spring-loaded pull-pin, allowing the complete assembly to pivot 90 degrees horizontally against the drawbar to prevent scraping over steep driveways and obstacles.
Smooth 250mm Precision Lifting Range: Precision-machined internal lead screw thread ensures low-torque, low-friction cranking across a 250mm stroke, facilitating quick hitch alignment with standard 50mm or 70mm ball couplers.
Marine-Grade Galvanized Corrosion Barrier: Coated with a heavy-duty zinc-plated/hot-dip galvanized finish engineered to withstand coastal saltwater immersion, road spray, mud, and prolonged outdoor UV exposure.
Certificates
Q1: What types of trailers are best suited for this 900kg 10-inch jockey wheel?
A: This 900kg jockey wheel is engineered for medium-to-heavy towing setups, including large tandem-axle caravans, offshore marine boat trailers, heavy camper trailers, horse floats, and commercial flatbed utility trailers requiring high tongue weight capacity.
Q2: What is the operational advantage of a 10-inch solid rubber wheel over smaller 6-inch or 8-inch wheels?
A: The larger 10-inch (254mm) diameter creates a broader contact patch and a lower rolling resistance angle. This prevents the trailer tongue from bogging down in soft sand, loose gravel, or mud, and makes manual maneuvering across boat ramps and uneven campsites significantly easier.
Q3: How does the swing-up swivel mechanism work during transit?
A: The swing-up bracket features a heavy-duty spring-loaded release pin. Once the trailer is hitched to the tow vehicle, pulling the pin allows the entire jockey wheel assembly to pivot 90 degrees horizontally parallel to the chassis drawbar, locking into place for maximum road clearance.
Q4: Will a solid rubber tire degrade or develop flat spots under prolonged 900kg static storage?
A: No. Unlike soft foam-filled or pneumatic tires that suffer from UV dry rot and pressure drops, this wheel is molded from high-density, anti-aging vulcanized solid rubber over a structural steel core, ensuring consistent shape retention and heavy load-bearing capability during long-term outdoor parking.
Q5: What B2B and OEM customization options are available for trailer manufacturers?
A: We offer direct factory supply with full customization, including custom U-bolt swivel brackets to fit 50mm/75mm/100mm chassis rails, personalized brand stamping or laser engraving, customized crank handle styles, and bulk export palletization.