87728-60 1600kg 60mm Square Trailer Coupling | UN R55 Approved
R55-Approved Unbraked Coupling Head for 50mm Tow Balls, with D14.95/S120 Ratings and Wear and Attachment Indicators
| Specification | Details |
|---|---|
| Model | 87728-60 |
| Product Type | Square Trailer Coupling |
| Rated Capacity | 1600 kg |
| Drawbar Compatibility | 60 mm Square |
| Tow Ball Diameter | 50 mm |
| Approval | UN ECE R55 |
| Approval Number | E5755R02/020051*00 |
| Coupling Class | B50-X |
| D-value | 14.95 kN |
| S-value | 120 kg |
| Main Body Material | Q195 Steel, as specified in the approval documentation |
| Main Body Thickness | 4.0 mm |
| Brand | TOWDONE |
| Manufacturer | Ningbo ERA Vehicle Co., Ltd. |
Applications
Certificates
Q1. What drawbar size does this coupling fit?
This coupling is designed for a 60 × 60mm square tube drawbar. Check the mounting dimensions and drawbar construction against the approved installation drawing before fitting.
Q2. What tow ball size is required?
The coupling is designed for a 50mm tow ball. Confirm the ball diameter and condition, and follow the coupling’s attachment procedure before towing.
Q3. What do D14.95 and S120 mean?
D14.95 identifies a D-value of 14.95kN, a characteristic performance value for horizontal coupling forces. S120 identifies a maximum static vertical load of 120kg at the coupling. The complete towing combination must remain within all applicable component and vehicle limits.
Q4. Does the 1600kg rating permit towing an unbraked trailer weighing 1600kg?
The 1600kg figure is the stated coupling capacity. It does not establish the legal towing mass of an unbraked trailer. Trailer approval, braking requirements, towing vehicle limits and destination-market regulations must also be satisfied.
Q5. Which bolts are required for mounting?
The specified mounting requirement is two M12 bolts with a minimum property class of 8.8. Bolt length, nuts, washers and tightening torque must follow the model-specific installation instructions.
Q6. What is the mounting hole spacing?
The top mounting holes are on 90mm centres. Side mounting holes are also provided. Confirm the side-hole dimensions and permitted fastening arrangement using the final approved drawing.
Q7. What do the wear and attachment indicators show?
The wear indicator supports assessment of the coupling’s wear condition. The attachment indicator supports checking whether the coupling is correctly engaged with the tow ball. Interpret both using the instructions supplied with the model.
Q8. Is a lock included?
No. The coupling is supplied without a lock. Compatible optional lock Ref. 87753 can be specified separately.
Q9. Which soft dock is compatible?
The specified compatible accessory is soft dock Ref. 87717. Include this reference in the quotation request if it is required with the coupling.
Q10. What should OEM buyers confirm before a bulk order?
Confirm the coupling model, full R55 approval number, D- and S-values, drawbar drawing, mounting arrangement and fastener specification. Provide the destination market, required quantity and any lock, soft dock, marking or packaging requirements.