87729-50 1600kg Trailer Coupling for 50mm Round Drawbars
R55-Approved Pressed Steel Coupling Head for 50mm Tow Balls, with Wear and Attachment Indicators
| Item | Specification |
|---|---|
| Product Type | Trailer ball coupling head |
| Specified Trailer Configuration | Unbraked |
| Stated Coupling Capacity | 1600kg |
| Compatible Tow Ball Diameter | 50mm |
| Drawbar Compatibility | 50mm round tube |
| Required Mounting Bolts | 2 × M12 |
| Minimum Bolt Property Class | 8.8 |
| Top Mounting Hole Centres | 90mm |
| Side Mounting Hole Centres | 90mm |
| Material | Pressed steel thickness 4.0mm |
| Surface Finish | Zinc plated |
| Approval | UN R55 approved |
| Stated D-Value | 7.7kN |
| Stated Maximum Static Vertical Load | 1600kg |
| Indicators | Wear indicator and correct attachment indicator |
| Coupling Lock | Not included |
| Compatible Optional Lock | Ref. 87753 |
| Compatible Soft Dock | Ref. 87717 |
Certificates
Q1. What drawbar and tow ball sizes does this coupling fit?
The coupling is specified for a 50mm round tube drawbar and a 50mm tow ball. Check the two interfaces and mounting arrangement before ordering.
Q2. What mounting bolts are specified?
The supplied specification calls for two M12 bolts with a minimum property class of 8.8. Confirm bolt length, fastening arrangement and tightening torque from the model-specific instructions.
Q3. What do D7.7 and S75 mean?
D7.7 identifies a D-value of 7.7kN, a characteristic performance value for horizontal coupling forces. S75 identifies a maximum static vertical load of 1600kg at the coupling. Verify both values against this model’s approval documentation.
Q4. Does the coupling rating determine the permitted mass of the complete trailer?
No. The complete trailer’s permitted mass also depends on its approval, braking configuration, towing vehicle limits and applicable regulations.
Q5. What are the indicators used for?
The wear indicator supports assessment of the coupling’s service condition. The attachment indicator supports checking engagement with the tow ball. Read the markings according to the supplied operating instructions.
Q6. Are a lock and soft dock included?
The coupling is supplied without a lock. Compatible lock Ref. 87753 and soft dock Ref. 87717 can be specified separately.
Q7. What should OEM buyers confirm before ordering?
Confirm the drawbar and tow ball dimensions, approved capacity, D- and S-values, mounting drawing and complete R55 approval details. Provide the destination market, quantity and accessory requirements.