87719-40 800kg Trailer Coupling for 50 × 40mm Rectangular Drawbars
Pressed Steel 50*40mm Square Trailer Coupling – 800kg Unbraked Tow Hitch (R55 Approved)
| Item | Specification |
|---|---|
| Product type | Trailer ball coupling |
| Trailer type | Unbraked |
| Rated coupling capacity | 800 kg |
| Tow ball diameter | 50 mm |
| Drawbar compatibility | 50 × 40 mm rectangular tube |
| Material | Pressed steel |
| Surface finish | Zinc plated |
| Approval marking | E57 |
| Mounting | Top and side mounting holes |
| Mounting hole centres | 90 mm, as shown on the dimensioned face |
| Mounting hole diameter | 12 mm, as shown in the product image |
| Lock | Not included; compatible with optional lock 87753 |
| Soft dock | Compatible with optional soft dock 87717 |
| Net weight | 1.2 kg |
| Target market | Europe |
Certificates
This coupling is designed for a 50 × 40 mm rectangular tube drawbar. Measure the outside dimensions of the drawbar and check the mounting hole positions before ordering.
It fits a 50 mm diameter tow ball. The tow ball diameter and drawbar dimensions are separate measurements; both must be compatible with the coupling.
The coupling is rated at 800 kg. This is the coupling’s rated capacity; the permitted weight for a particular trailer and towing combination may be lower.
This model is intended for unbraked trailer applications. Check the trailer manufacturer’s requirements and local regulations when selecting a coupling.
The product image shows 80 mm centre-to-centre spacing and a 12 mm hole diameter on the illustrated mounting face. Confirm the hole arrangement against your drawbar before installation.
No. The coupling is supplied without a lock. Optional lock 87753 is compatible with this model.
The product carries an E57 approval marking. To confirm suitability for a specific vehicle or market, check the complete approval details and the applicable installation requirements.