87724 450kg 6 Inch Swing-Up Trailer Jockey Wheel with Solid Rubber Wheel (250mm Lift) – Heavy-Duty Swivel Swivel Jack Wholesale
Commercial-Grade 450kg (1000 lbs) Capacity Swing-Up Swivel Trailer Jockey Wheel with 6" (150mm) Puncture-Proof Solid Rubber Wheel for Caravans, Boat Trailers & Utility Rigs | Direct Factory OEM & Bulk Supply
| Technical Specification | Parameters & Engineering Details |
| Product Type | Heavy-Duty Swing-Up Swivel Trailer Jockey Wheel / Tongue Jack |
| Rated Load Capacity | 450 kg (Approx. 1000 lbs Static / Dynamic Tongue Support) |
| Wheel Diameter / Size | 6 Inch / 150mm Compact Rolling Wheel |
| Wheel Material | 100% Puncture-Proof Solid Rubber with High-Impact Steel Rim |
| Lifting Height / Stroke | 250mm (Approx. 10 Inch) Vertical Travel Range |
| Swivel Mechanism | Heavy-Duty Swing-Up Swivel Bracket with Pull-Pin Quick Release |
| Chassis Mounting | Direct Bolt-On / U-Bolt Chassis Mount (Fits Standard Box Section Drawbars) |
| Operating Mechanism | Ergonomic Top-Wind / Side-Crank Precision Handle |
| Material Construction | Heavy-Gauge High-Tensile Structural Carbon Steel |
| Surface Finish | Marine-Grade Corrosion-Resistant Electro-Zinc Plated / Hot-Dip Galvanized |
| Target Applications | Caravans, Light-to-Medium Boat Trailers, Box Utility Trailers, Camper Haulers |
| B2B Supply Capabilities | OEM Tube Sizing, Custom Swivel Plate Drill Patterns, Stamped Load Ratings, Export Pallet Packaging |
Key Features
100% Puncture-Proof 6″ (150mm) Solid Rubber Wheel: Molded from heavy-duty solid rubber that delivers smooth rolling over concrete, tarmac, and hard-packed boat ramps without the risk of punctures, air deflation, or UV cracking.
Rapid Swing-Up Swivel Transit Clearance: Integrated swivel bracket with a heavy-duty spring-loaded pull-pin allows the entire jockey wheel assembly to pivot 90 degrees horizontally along the trailer drawbar, preventing ground strikes and undercarriage damage while towing.
Dependable 450kg (1000 lbs) Support Rating: Built with a high-strength structural steel tube and reinforced thrust bearings, engineered to handle up to 450kg vertical tongue loads without tube bending or thread binding.
Smooth 250mm Precision Lifting Range: Precision internal acme lead-screw thread delivers low-torque, low-friction cranking across a full 250mm stroke for easy coupler alignment with standard 50mm or 1-7/8″ tow hitch balls.
Marine-Grade Zinc / Galvanized Protection: Treated with a thick corrosion-resistant zinc plating or galvanizing to withstand harsh marine environments, boat ramp splashback, road salt, and all-weather outdoor storage.
Certificates
Q1: What trailer applications are best suited for this 450kg 6-inch swing-up jockey wheel?
A: This 450kg swing-up jockey wheel is ideal for light-to-medium trailer applications, including single-axle camper trailers, small-to-midsize fishing boat trailers, caravans, jet ski trailers, and standard trade utility box trailers.
Q2: What is the main advantage of a swing-up mechanism on a boat or utility trailer?
A: The swing-up mechanism allows the jockey wheel to pivot 90 degrees horizontally alongside the drawbar without needing to be detached. This ensures quick transit preparation and prevents the wheel from dragging or striking obstacles on steep driveways, speed bumps, and boat launch ramps.
Q3: Why choose a 6-inch solid rubber wheel over a pneumatic tire?
A: Solid rubber wheels eliminate puncture flats caused by nails, sharp gravel, or metal debris common on job sites and boat ramps. They require zero maintenance and will not develop flat spots or lose pressure during seasonal trailer storage.
Q4: How does the 250mm lift stroke assist during hitching and leveling?
A: The 250mm vertical travel provides ample adjustment to level trailer chassis tongues and smoothly raise or lower the ball coupling onto various tow vehicle hitch receiver heights.
Q5: What OEM and wholesale options are available for trailer manufacturers?
A: We offer comprehensive B2B customization, including custom mounting plate hole patterns (to fit 50mm, 75mm, or 100mm drawbars), custom tube finishes (zinc-plated, hot-dip galvanized, or powder-coated), private-label logo stamping, and bulk pallet packaging for assembly plants.