86103 12V Bulb Trailer Light Kit with 6m Wiring Harness and 5-Pin Quick Connectors
E9-Approved Rear Lamps with Stop, Tail, Turn and Number Plate Lighting, a 7-Pin EU Plug and Stainless Steel M5 Mounting Screws
| Item | Specification |
|---|---|
| Product type | Wired bulb trailer rear light kit |
| Voltage | 12V DC |
| Functions | Stop / Tail / Turn Indicator / Number Plate Lighting |
| Bulb specification | 21W/5W |
| Materials | PC + ABS |
| Wiring harness | 6m, 100% copper conductors |
| Vehicle connection | 7-pin EU-standard PVC plug |
| Lamp connections | Green and yellow plastic 5-pin quick connectors |
| Mounting hardware | Stainless steel M5 screws |
| Mounting screw spacing | 45mm centre-to-centre |
| Approval | E9 |
The ERA VEHICLE 12V bulb trailer light kit combines two rear lamps with a 6m wiring harness, 100% copper conductors and a 7-pin EU-standard PVC plug. Green and yellow 5-pin quick connectors link the harness to the lamps, allowing each lamp to be disconnected for installation or servicing.
The E9-approved lamps provide stop, tail, turn indicator and number plate lighting functions. PC and ABS construction, together with stainless steel M5 mounting screws at 45mm centres, provides a defined specification for trailer manufacturers, parts distributors and replacement-lighting programmes.
Certificates
The 7-pin EU plug connects the lighting harness to the towing vehicle. The 5-pin quick connectors connect the harness to the individual rear lamps. They serve different connection points within the kit.
The lamps use stainless steel M5 mounting screws with 45mm centre-to-centre spacing. Check the mounting-hole pattern, rear clearance and cable access against your trailer bracket before installation.
Yes. The 5-pin quick connectors allow the lamps to be disconnected from the harness. Replacement lamps must have matching connector interfaces and pin assignments.
Confirm the destination market, order quantity, mounting dimensions, harness layout and connector pin assignments. The model-specific E9 approval documents should also be checked against the lamp functions required for the intended application.