# 87144 12V IP68 Prewired LED Trailer Fender Lights – Amber/Red Pair

- Link: https://www.eravehicle.com/?products=87144-2
- Published: 2026-06-12T15:13:07+08:00
- Author: admin

## Technical Specifications

  |  Item |  Specification |  
 |  Product type |  Prewired LED trailer fender light assembly set |  
 |  Voltage |  12V DC |  
 |  Intended function |  Fender-mounted clearance lighting |  
 |  Forward-facing light |  Amber |  
 |  Rearward-facing light |  Red |  
 |  Set configuration |  One left assembly and one right assembly |  
 |  Round lamp diameter |  3/4 inch / approximately 19mm |  
 |  LED configuration |  Single-diode round lamps |  
 |  Housing material |  Black plastic |  
 |  Ingress protection |  IP68 |  
 |  Compliance |  DOT/SAE compliant |  
 |  Assembly condition |  Fully assembled and prewired |  
 |  Mounting |  Three screw mounting holes per assembly |  
 |  Dimensions shown in product image |  Approximately 6.5 × 2.13 × 0.87 inches |  
 |  Approximate metric dimensions |  165 × 54 × 22mm |  
 |  Mounting fasteners |  Not included |

## Key Features

**Amber Front and Red Rear Lighting**

Each assembly combines one forward-facing amber lamp and one rearward-facing red
lamp. The set contains matched left and right assemblies.

**IP68-Rated Construction**

The assemblies provide IP68 ingress protection under the model’s specified immersion
conditions. Refer to the corresponding test documentation for depth and duration.

**Preassembled and Prewired**

The LED lamps are already installed and wired within the housings, simplifying component
preparation during trailer assembly.

**Compact Fender-Mount Design**

The black plastic housings accommodate 3/4-inch round LED lamps. Three mounting 
holes secure each assembly to a suitable fender surface.

**DOT/SAE Compliance**

DOT/SAE-compliant assemblies are available for buyers requiring documented lighting
performance. Match the model-specific compliance records to the intended vehicle
application.