# 87006R 2-Inch Red LED Trailer Side Marker Light, 12V

- Link: https://www.eravehicle.com/?products=87006r
- Published: 2026-05-29T13:18:37+08:00
- Author: admin

|  Item |  Specification |  
   |  Product model |  87006R |  
 |  Product type |  LED side marker lamp |  
 |  Light colour |  Red |  
 |  Nominal size |  2 inches round |  
 |  Light source |  3 LEDs |  
 |  Operating voltage |  12V DC |  
 |  Stated current draw |  0.05 A at 13.8V |  
 |  Lens material |  Polycarbonate (PC) |  
 |  Body construction |  Ultrasonically welded sealed body |  
 |  Mounting |  Grommet mount |  
 |  Connector |  Compatible with a 2-pin plug |  
 |  Ingress protection |  IP67 |  
 |  Lens marking in historical notice |  LIWOF, SAE P2 18 DOT |  
 |  Standard listed in historical notice |  United States FMVSS 571.108 |

## **Key Features**

### 1. Red LED Side Marker Light

The **87006R** is a round red LED side marker lamp designed for vehicle and trailer
applications. The historical test documentation identifies the tested light source
as **three LEDs operating on 12V DC**.

### 2. Compact 2-Inch Round Design

With a nominal **2-inch round format**, the lamp can be considered for installations
where a compact side marker light is required.

The supplied drawing shows a **51.7 mm diameter**. Check the lamp and grommet dimensions
against the available installation space before ordering.

### 3. Grommet Mounting and 2-Pin Connection

The lamp is designed for **grommet mounting** and a **2-pin plug connection**. A
right-angle plug configuration is described as compatible.

For OEM installation, confirm the connector dimensions, wire functions and clearance
behind the mounting panel. The grommet, plug and wiring supplied may depend on the
ordered configuration.

### 4. IP67-Rated Construction

The lamp features a **polycarbonate lens** and an **ultrasonically welded sealed
body**. Its stated IP67 rating describes protection against dust and temporary immersion
under specified test conditions.

The connector and wiring arrangement should also be considered when the lamp is 
installed in an area exposed to water or road spray.

### 5. Historical FMVSS 108 Test Documentation

The 87006R is supported by a **2019 test report** referenced in an AMECA Notice 
of Equipment Compliance. The notice identifies the product as a red side marker 
lamp with **3 LEDs and 12V DC operation**, and lists **United States FMVSS 571.108**.

The notice records the lens marking **LIWOF, SAE P2 18 DOT**. Buyers should verify
that the supplied lamp matches the tested configuration and request the relevant
current documentation for their application.

## **Applications**

 * Trailer side marker lighting
 * Utility and cargo trailers
 * Trucks and commercial vehicles
 * RVs and campers
 * Trailer OEM production
 * Aftermarket replacement-parts distribution

The historical notice describes the tested lamp for use on vehicles with an **overall
width of 2,032 mm or less**. Suitability for a particular vehicle depends on the
applicable requirements and installation.